bowie 98/09/08 ir initial release output characteristics (any combination of operating (supply) voltage, operating temperature range and loading) symmetry: 40/60% max @ 0.5 v dd rise & fall times: 5 nsec max @ 20 % to 80% v dd "0" level: 10% v dd max "1" level: 90% v dd min output load: 50 pf a) b) c) d) e) input (supply) current: 35ma max input (supply) voltage: +5 vdc 10% recommended operating, +7 vdc absolute max storage temperature range: -55c to +125c operating temperature range: -20c to +85c model identification number: s2246 cmos clock s2246 electrical, environmental mechanical specification s2246 ? 44.7360 mhz date code saronix standard marking format * s2246 0.036 max 0.200 max 0.270 max 0.510 max dia: 0.018.002 4 places 0.300 .008 0.300 .008 0.510 max 85 1 4 n/c ground output +5 vdc pin connection 1 4 5 8 figure 1 ? package drawing * exact location of items may vary dot / square corner indicates pin 1 44.7360 mhz thermal shock: mil-std-883, method 1011, condition a moisture resistance: mil-std-883, method 1004 a) b) dimensions: per figure 1 shock: mil-std-883, method 2002, condition b solderability: mil-std-883, method 2003 terminal strength: mil-std-883, method 2004, test condition b2 vibration: mil-std-883, method 2007, condition a solvent resistance: mil-std-202, method 215 resistance to soldering heat: mil-std-202, method 210, condition a, b or c a) b) c) d) e) f) g) operating frequency: 44.7360 mhz frequency stability (over all combinations of operating temperature, rated input (supply) voltage changes, load changes, calibration tolerance, 30-day aging, shock and vibration) : 25 ppm issued date size cage code sheet 1 of 2 dwg. no. title 141 jefferson drive, menlo park california 94025, u.s.a. a 61441 revisions date appd description rev sar# 150c saronix 1) unless otherwise specified qa drn chk eng remove all burrs and sharp edges all diameters to be concentric within .005 tir tolerances: xxx=0.005 xx=0.05, hole: .003 dimension in: mm/inches angular: 2 mfg 2) 3) 4) 5) 6) 7) environmental: mechanical: 8) 9) 10) j k 98/09/14 b. drakhlis 98/09/08 c. taylor 98/09/08 g. schmidt 98/09/10 r. bush 98/09/09
internal use only s2246 98/09/08 ir approved manufacturer menlo park / skil / kony circuit / part # circuit ? 030 note: no changes shall be made that affect design, bill of materials, or assembly process, without prior authorization from saronix menlo park. any request for change shall be initiated by completion of form sar-456 at least 90 days prior to product shipment and may be subject to requalification (refer to qap-81). frequency stability at the time of shipment: 22 ppm sar# 504 size cage code 61441 a rev date dwg. no. sheet 2 of 2 141 jefferson drive, menlo park california 94025, u.s.a. saronix 10.1) 11) design / manufacturing details:
|
